Quote:
The degree of the retainer and the lock must agree. So if you have 7 degree locks and 7 degree retainers you might be okay. But if the locks aren't cut or recessed for the edge of the lash cap you will have problems. It all depends on the locks. So mock one up, and see if the lash cap sits down on the valve tip as it should.
I did that on the very same stuff.
Comp stuff here
741 retainers
610 valve locks
619 lash caps
Look
[color:"red"]65 Hemi Belvedere coming soon [/color]
[color:"#00FF00"]557" Indy engine 1.07 60ft 144mph in the 8th 2100 lbs package [/color]
| 
