Mostly street, track couple times a year at most. Just for the slip.

A-body, 3300lbs with my butt in it, 904 trans, 3000 stall, 4.30's, footbrake only

Basics:
Holley 800cfm DP carb
Edelbrock Performer RPM intake
Deep port match/ bowl clean up 2.02/1.60 valves 597 heads (enough for 250cfm @ .550" lift
10.5:1 Compression
Stock 3.58" Stroke
6000-6500 max rpm
all on 91 octane E10 swill


* prefer solid, would entertain hydraulic, but not likely.
* would like to average over 400ft-lbs from 3500-5500 rpm

was thinking MP 557 cam.. old design, but hard to beat.