"A 110-Volt, single phase machine (140+ Amp) with 75/25 mix of Argon/CO2 gas and 0.023" to 0.030" wire should do most of what you mentioned, welding 3/8" and thinner carbon steel."
Sorry, but you are not welding 3/8" with a 140 amp machine with any confidence, most everything else on this thread is pretty standard info.
Last edited by jcc; 04/03/1601:23 PM.
Reality check, that half the population is smarter then 50% of the people and it's a constantly contested fact.
