Yes over and over. My 06 1500 just had the front wheel bearing done and rotor because it got so hot the last time it hung, it warped the rotor. It took about four months before the wheel bearing went but I am expecting that was the cause of the premature failure.

Had one hang on the rear as well and it took out the rear axle seal on the passenger side.

Both times the brake caliper was warrantied but none of the other damage was.

I have gotten in a habit now spring and fall to pull them off put some anti seize on the two stainless rods.

Pop it off run some sand paper in them and on the rods then silver anti seize and your off.

Cheers Don.