AAR Cuda - Correct orientation of "Hood Pins"

Print Thread

Re: AAR Cuda - Correct orientation of "Hood Pins" [Re: 1970_EK2AAR] #1909707 09/10/15 02:11 AM 09/10/15 02:11 AM
Joined: Jan 2003 Posts: 2,340 Lancaster Pa Transamcuda top fuel
Transamcuda top fuel Joined: Jan 2003 Posts: 2,340 Lancaster Pa	The pin location was supposed to be straight in but ive seen it both ways on original survivor cars. Meaning straight in and from the side. Also the holes to anchor the hood pin bezel to the hood. Have seen it both ways + and X Here are the hood pins from a 1200 mile AAR The pins get pushed in from the sides. Home of the AAR Registry www.transamcuda.com

Entire Thread
Subject	Posted By	Posted
AAR Cuda - Correct orientation of "Hood Pins"	Imrare	09/10/15 12:53 AM
Re: AAR Cuda - Correct orientation of "Hood Pins"	6pkaar	09/10/15 02:34 AM
Re: AAR Cuda - Correct orientation of "Hood Pins"	1970_EK2AAR	09/10/15 03:36 AM
Re: AAR Cuda - Correct orientation of "Hood Pins"	Transamcuda	09/10/15 06:11 AM
Re: AAR Cuda - Correct orientation of "Hood Pins"	Transamcuda	09/10/15 06:17 AM
Re: AAR Cuda - Correct orientation of "Hood Pins"	Imrare	09/10/15 10:42 PM
Re: AAR Cuda - Correct orientation of "Hood Pins"	AARCONV	09/10/15 06:51 PM

Hop To