AAR Cuda - Correct orientation of "Hood Pins"

Print Thread

Re: AAR Cuda - Correct orientation of "Hood Pins" [Re: Imrare] #1909607 09/09/15 11:36 PM 09/09/15 11:36 PM
Joined: Jan 2013 Posts: 64 Michigan 1 1970_EK2AAR member
1970_EK2AAR member 1 Joined: Jan 2013 Posts: 64 Michigan	Since the AAR-T/A hoods are fiberglass composite . . . not screws, but rivets

Entire Thread
Subject	Posted By	Posted
AAR Cuda - Correct orientation of "Hood Pins"	Imrare	09/10/15 12:53 AM
Re: AAR Cuda - Correct orientation of "Hood Pins"	6pkaar	09/10/15 02:34 AM
Re: AAR Cuda - Correct orientation of "Hood Pins"	1970_EK2AAR	09/10/15 03:36 AM
Re: AAR Cuda - Correct orientation of "Hood Pins"	Transamcuda	09/10/15 06:11 AM
Re: AAR Cuda - Correct orientation of "Hood Pins"	Transamcuda	09/10/15 06:17 AM
Re: AAR Cuda - Correct orientation of "Hood Pins"	Imrare	09/10/15 10:42 PM
Re: AAR Cuda - Correct orientation of "Hood Pins"	AARCONV	09/10/15 06:51 PM

Hop To