Hi all,

I just purchased some 18x9 +34 Torque Thrust M anthracite wheels for my 1970 Duster with the 11.75" Cordoba brake setup, Hotchkis UCAs and a 68 B-body 8 3/4. I will be running 275-35-18's all the way around.

I went to test fit the wheels on the front, and while the specs list the hub bore to be acceptable for a mopar, they do not fit on to go all the way down to the hub flange due to the register for the center cap.



What are my options for this? It seems like opening up the wheel could work however the area by the center cap on the outside edge might be getting kinda thin at that point. It also seems that the rotor could be turned down as well, but the center cap won't fit anyway. I've considered a DrDiff Cobra brake setup. is that different enough to fit?

Here is the fitment on the rear, you can see it fits fine back there:



Please let me know your thoughts on my options.