I will admit that transmissions are my weak point...not having much experience with them at all. I tore into the transmission to replace the front planetary and go from the 2.74 gear back to the stock standard ratio. I was putting the trans back together after re-setting the clearance and everything seemed to go together ok, but take a look at the attached picture and tell me if the front drum drive tabs are engauged all the way. I don't remember what it looked like before. Are they supposed to be fully engauged and I possibly don't have all the clutches lined up therefore preventing it from seating? Need help to get this thing back in the car.....it was 80 degrees today and I could be racing in January.