So we went to opening day at Empire today....Ran my Engine builders 69 Barracuda with the 477 Hemi pump gas street motor. It has a .540 solid lifter cam and a RBRE single plane intake. Your basic 10:1 street hemi with a 4.15 stroke.

We put my 1000cfm 4150 on it and it fired right up....All with the settings above:

94 jets square, no power valves, 45 squirters front and rear, 50cc accel pumps front and rear, #70 air bleeds for idle, #27 hs bleeds....

Only made two passes...

Off the trailer she went 10.57 at 127.3mph....

Next pass 10.52 at 127.8mph with #28 hs bleeds was the only change. All that with a slower 1.48 60ft over the first pass. Track was off a little and we are not sure where to run the tire pressure yet.

Fires up the minute you touch the button, no input from your gas pedal needed, and runs just as awesome as it did on my 512...

Time between trails was really long, plus a swap meet so I only made two passes....And nothing broke.