After re-reading your info and seeing the combination is under 3000#s, I don't understand why it's not already well into the 9s. My junk ran 10.5s at 126 (6.6s at 101-102 in the 1/8th) at over 3700#s w/ a far more conservative combination.

I don't think you need a different cam; I think you need more cubic inches to make the rest of the combination you have work better.

EDIT: If you're "stuck" w/ changing only the cam, I'd say use the first cam in your list to see how much mid-range torque you can recover vs. that big-a$$ 'stick in there now.