Quote:

Just swapping lower ball joints will mess with the steering geometry. I have pictures of the spindles I made/ altered for my Road Runner I will post later. Uses a modified stock lower ball joint, but not the ball joint arm.

Jeff



It adds caster,moves the bottom of the spindle forward .110 by my measurements
I don`t think it is a drastic change.

Jeff,I`m very interested in seeing how you did yours

Looked at making a bolt on steering arm,but that I don`t think its the simple route. I can get a pair of tie rod adapters and use rod-ends instead of tie rods and be done.
Trying to avoid fabbing/modifying wearable parts since who knows if I will have the means to duplicate them down the road or the problem for a new owner in the future as well.

Last edited by 6bblFLASH; 01/09/15 09:51 PM.
70` Cuda`,440 6BBL Jerico,Dana 4.56 Still on 93 Pump Gas
9.87 @ 136/1.31-60ft.`09 Mopar Nationals PASSON PERFORMANCE "Stick-Shift" Champ!
2013 StickShift Challenge Winner@ Mopar Nationals!