stroking a 400 - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer stroking a 400

Print Thread

Re: stroking a 400 [Re: elephant express] #1716379 12/28/14 02:38 PM 12/28/14 02:38 PM
Joined: Feb 2008 Posts: 78 tampa florida E elephant express OP member
elephant express OP member E Joined: Feb 2008 Posts: 78 tampa florida	Thanks guys. I'll find a 440 block for this build. I just had a nice billet crank that was the 2.2 rod pin and 4.5 stroke that I wanted to stuff into a 400 but a 440 is fine. For my Dakota at around 650 to 700 hp is no problem. I'll save the 400 for 5 speed Demon I hope to build in the near future. Again Thanks Joe

Entire Thread
Subject	Posted By	Posted
stroking a 400	elephant express	12/27/14 05:05 PM
Re: stroking a 400	69HemiGTX	12/27/14 05:33 PM
Re: stroking a 400	RapidRobert	12/27/14 06:22 PM
Re: stroking a 400	GY3	12/27/14 06:34 PM
Re: stroking a 400	RapidRobert	12/27/14 07:22 PM
Re: stroking a 400	Cab_Burge	12/27/14 08:48 PM
Re: stroking a 400	elephant express	12/28/14 06:38 PM
Re: stroking a 400	RapidRobert	12/28/14 06:56 PM
Re: stroking a 400	Cab_Burge	12/31/14 01:07 AM
Re: stroking a 400	DaveRS23	12/31/14 01:44 AM
Re: stroking a 400	Cab_Burge	12/31/14 04:40 AM
Re: stroking a 400	DaveRS23	12/31/14 05:16 PM
Re: stroking a 400	Cab_Burge	12/31/14 09:07 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1