Did some work on it today... Milled the mounts on the r&p to move it to the rear about .4". Things improved but not good. So next is to move the lower arms alittle forward (only very little possible) and grind a small notch to move the r&p downwards (again only a small amount) then install adj steering stops and finally mill the upper shock mounts to decrease downward travel. I think that that together will work. Might still rub the dust boots but that i can live with. As far as for track width im thinking of milling the mounting surface of the wheels and the hubs. About 1/8" on both. Maybe that will be enough...
