Yes I plan to leave it flush for now with the additional spring tension and spacers.

I still find it odd that the kit instructions dated Nov 2011, make no mentioned of an adjustment, and Munroe's handbook 1st edition 2003 where on page 107 the kit install is detailed, there is no mention either. This leads me to believe it's left at the factory 1 5/16". I suspect line pressure then is well over 100 psi with the kit.

That said, what can I expect for line pressure? Stock is 54-60 psi at 1k rpms, and 90-96 psi with TV fully depressed, and f/r servo within 3 psi of line.