Quote:

---

There are two settings:
Float level
Float drop

If you go through your manual you will get an idea of how they are set. Float level is set first with the carb air horn upsidedown. This is the level that will close off the incoming fuel. Float drop is the distance the float will drop to open the needle valve to let fuel in.

---

As usual, Jim saves the day.

Thanks for the info, I'm gonna go read through the manual a bit.

I did try a whole bunch of local parts stores. No one can find floats for me. One could find them and can't order them, another pulled out a carb book, and under the part # on my carb, there is no float part # listed at all. Float part numbers listed for everything else BUT mine. Typical.

Any other suggestions? I got a few numbers to some local private folks who might, but I thought I'd ask again here.