Cut to length push rods - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Cut to length push rods

Print Thread

Re: Cut to length push rods [Re: MR_P_BODY] #1652250 07/29/14 04:05 AM 07/29/14 04:05 AM
Joined: Dec 2006 Posts: 4,647 aotearoa rebel master
rebel master Joined: Dec 2006 Posts: 4,647 aotearoa	i use Comp Cams cut to length pushrods & bought the special drill they sell to cut them down plus ream the inside for the cup to fit. they press in very easily plus you can buy the correct 5/16 ball n cup combo.

Entire Thread
Subject	Posted By	Posted
Cut to length push rods	'72CudaRacer	07/29/14 04:51 AM
Re: Cut to length push rods	Bigbeep	07/29/14 04:57 AM
Re: Cut to length push rods	MR_P_BODY	07/29/14 05:03 AM
Re: Cut to length push rods	rebel	07/29/14 08:05 AM
Re: Cut to length push rods	Mcode69	07/29/14 08:31 AM
Re: Cut to length push rods	JAKE68	07/29/14 01:20 PM
Re: Cut to length push rods	julian2007	07/29/14 11:30 PM
Re: Cut to length push rods	JAKE68	07/30/14 12:04 AM
Re: Cut to length push rods	440Jim	07/30/14 02:02 AM
Re: Cut to length push rods	'72CudaRacer	07/30/14 03:07 AM
Re: Cut to length push rods	poppaj	07/30/14 04:49 AM
Re: Cut to length push rods	julian2007	07/30/14 07:02 PM
Re: Cut to length push rods	Nitrofish	07/31/14 12:59 AM
Re: Cut to length push rods	CHAPPER	08/03/14 03:32 PM
Re: Cut to length push rods	451Mopar	08/03/14 09:03 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1