Cut to length push rods - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Cut to length push rods

Print Thread

Cut to length push rods #1652247 07/29/14 12:51 AM 07/29/14 12:51 AM
Joined: Aug 2009 Posts: 2,050 Mooresburg, Tn ' '72CudaRacer OP top fuel
'72CudaRacer OP top fuel ' Joined: Aug 2009 Posts: 2,050 Mooresburg, Tn	Years ago (many) I purchaced a push rod kit from Mopar Performance that you cut to lenght then finnished putting them together. They had a long push rod finnished on the bottom, a cup, a drill to open up the ID where the cup fit(after you cut to lenght) and a fixture to hold the push rod while you pressed the cup in. Thick walled CM I belive. Does anyone offer a kit like that anymore? Brian

Entire Thread
Subject	Posted By	Posted
Cut to length push rods	'72CudaRacer	07/29/14 04:51 AM
Re: Cut to length push rods	Bigbeep	07/29/14 04:57 AM
Re: Cut to length push rods	MR_P_BODY	07/29/14 05:03 AM
Re: Cut to length push rods	rebel	07/29/14 08:05 AM
Re: Cut to length push rods	Mcode69	07/29/14 08:31 AM
Re: Cut to length push rods	JAKE68	07/29/14 01:20 PM
Re: Cut to length push rods	julian2007	07/29/14 11:30 PM
Re: Cut to length push rods	JAKE68	07/30/14 12:04 AM
Re: Cut to length push rods	440Jim	07/30/14 02:02 AM
Re: Cut to length push rods	'72CudaRacer	07/30/14 03:07 AM
Re: Cut to length push rods	poppaj	07/30/14 04:49 AM
Re: Cut to length push rods	julian2007	07/30/14 07:02 PM
Re: Cut to length push rods	Nitrofish	07/31/14 12:59 AM
Re: Cut to length push rods	CHAPPER	08/03/14 03:32 PM
Re: Cut to length push rods	451Mopar	08/03/14 09:03 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1