2295s on LYs and balancing - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech 2295s on LYs and balancing

Print Thread

2295s on LYs and balancing #1625056 05/25/14 11:28 PM 05/25/14 11:28 PM
Joined: Dec 2012 Posts: 50 Australia B big_wedge OP member
big_wedge OP member B Joined: Dec 2012 Posts: 50 Australia	Iv read that when using the trw 2295 piston on the old six pack rods a balance job will require adding mallory weight to the crank, but what about when using the 2295s on the LY rod, is adding weight still needed?

Entire Thread
Subject	Posted By	Posted
2295s on LYs and balancing	big_wedge	05/26/14 03:28 AM
Re: 2295s on LYs and balancing	hemiiroc	05/26/14 03:30 AM
Re: 2295s on LYs and balancing	Cab_Burge	05/26/14 03:53 AM
Re: 2295s on LYs and balancing	big_wedge	05/26/14 06:07 AM
Re: 2295s on LYs and balancing	B G Racing	05/26/14 12:44 PM
Re: 2295s on LYs and balancing	big_wedge	05/26/14 01:00 PM
Re: 2295s on LYs and balancing	B G Racing	05/26/14 06:54 PM
Re: 2295s on LYs and balancing	JohnRR	05/27/14 05:25 PM
Re: 2295s on LYs and balancing	BSB67	05/26/14 02:44 PM
Re: 2295s on LYs and balancing	Cab_Burge	05/26/14 05:55 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1