1976 440 - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer 1976 440

Print Thread

Re: 1976 440 #161294 12/05/08 06:39 PM 12/05/08 06:39 PM
Joined: Jan 2003 Posts: 2,734 Charlotte, NC 4 446acuda master
446acuda master 4 Joined: Jan 2003 Posts: 2,734 Charlotte, NC	Quote: If the parting line is really thin it is a cast crank. If the parting line is thick (about 3/8") it is forged. Sheldon Also the 440 cast cranks that I have seen have "440" on them

Entire Thread
Subject	Posted By	Posted
1976 440	griff70440	12/05/08 01:03 AM
Re: 1976 440	340dart4spd	12/05/08 01:10 AM
Re: 1976 440	DaytonaTurbo	12/05/08 01:10 AM
Re: 1976 440	RemCharger	12/05/08 01:55 AM
Re: 1976 440	OzHemi	12/05/08 02:06 AM
Re: 1976 440	dave571	12/05/08 03:09 AM
Re: 1976 440	NTOLERANCE	12/05/08 04:01 AM
Re: 1976 440	340dart4spd	12/05/08 04:10 AM
Re: 1976 440	fastmark	12/05/08 04:22 AM
Re: 1976 440	NTOLERANCE	12/05/08 04:27 AM
Re: 1976 440	Dennispsalm91	12/05/08 02:15 PM
Re: 1976 440	RapidRobert	12/05/08 03:58 PM
Re: 1976 440	fastmark	12/05/08 04:37 PM
Re: 1976 440	340dart4spd	12/05/08 05:54 PM
Re: 1976 440	griff70440	12/05/08 10:27 PM
Re: 1976 440	Anonymous	12/05/08 10:37 PM
Re: 1976 440	446acuda	12/05/08 10:39 PM
Re: 1976 440	446acuda	12/05/08 03:46 PM
Re: 1976 440	Anonymous	12/05/08 03:16 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1