Quote:

I'll try to swap out the 261/268 .585/.570 Cam Motion Roller with the 260/269 .668/.645 Bullet roller before I run it again. The new cam will take better advantage of the better +.550 lift of the heads and should help top end power with no downside (other than more violent valve motion) to the torque curve.

I also plan on rebuilding the brakes to get it to hold better while staging, that should let me bump up the pill another 400 or so and hopefully between the 2 mods help my 60' and 1/8th times.



I thought you were doing that this weekend....you said it would take you less than an hour.