Wheel spacers

Print Thread

Re: Wheel spacers [Re: MR_P_BODY] #1597494 03/23/14 08:17 PM 03/23/14 08:17 PM
Joined: Oct 2003 Posts: 614 ont,canada M mopartuner OP mopar
mopartuner OP mopar M Joined: Oct 2003 Posts: 614 ont,canada	Quote: Quote: On the stud lenth I am ok.But I need to move the rotor out away from the caliper bracket.My axel offset is 2.185 and the kit is made for 2.360 so I need at least a .175 spacer.Ineed to put the spacer between the axel and the rotor.Is this going to be ok? For .175 I wouldnt worry about it... but I think you will end up making them.. I dont think I have seen a spacer at that thickness I will probably just buy a set of .200 and that will give me more than enough room.I was looking at a set of alluminum spacers.Thanks for the reply p you are allways a big help. 410 pump gas solis flat tappet cam 10.95 so far

Hop To