Quote:

---

I have never seen anyone weld the rose-et welds on a four link or wheelie bars when useing threaded tube ends.

---

All my inserts are puddle welded... front steering
links as well as all the 4 link stuff.. and on every
chassis that leaves my shop.. I was taught by a chassis
guy and he said it is required.. I think I seen it
in the NHRA rule book back a few years ago
EDIT
I know I seen it in the book.. but it was if you
were splicing in a piece in tubing(with a inner tube
inside the outer it is required) so this is basically
no difference except its not in a certed area but
it is for strength