Quote:

its a moly rod end adapter to mild steel round tube..



Still has to be tigged(in my opinion for the strongest
joint).. the er70 is fine... also on tube adapters
you should drill a hole back about half way on it
through the tube and puddle weld it closed for a
proper way to do it... I do that all the time(if
you ever had it checked that is required)
EDIT
depending on the size of the insert I usually drill
a 3/16 or a 1/4 hole to fill

Last edited by MR_P_BODY; 03/21/14 07:51 PM.