Quote:

---

Quote:

---

Look at any of Comp Cams 110 degree LSA cams, almost every one of them has a recommended intake centerline angle of 106 degrees, AKA 4 degrees advanced.

---

My comp roller is exactly as GTX said. Dot to Dot came in a 106. The advance is figured in already. So the OP's cam may come in at 104 when lined up.

---

"The advance is figured in already" - and that is where a lot of the confusion comes in on this subject. That is also why you should start with the cam card specs when installing a cam - unless you have a SOLID, FACTUAL reason to deviate from it. Doing it automatically on every cam you install for the reasons listed in this thread aint good enough - for me. Those that do that will never know if they made improvements or not. JMO. I still like almost everyone here