Quote:

---

Dont even try to do the dot to dot... you will never
know what you have... degree it in... and if this is
a street car advance it more than the 108... 104 would
be better for the low end torque... even 102
EDIT
To the manu... 108 is straight up... all they do is
move the key way 4* from the 112

---

Never, EVER take anything thing on motors for granted, NEVER I've seen cams that where ground 8 degrees retarded I've seen timing sets marked no where near accurate Take your time and slide that rascal in on the two O marks, line the dots up and check the lifter timing at .050 lifter rise first, that will tell you if your close If not adjust(move the crank gear to another location, advanced or retarded, and recheck it Always verify everything with after market parts, if you don't Mr Murphy will take a big old bite out of your Butt, you know he will At least he does that to me regularily