Quote:
Well I have gone through 3 issues with the overdrive unit that put lots of crap into the system, plus two split trans lines to the cooler which meant at least 30-40 quarts of fluid has been added since all that took place.  I found that the trans mount was broken which probably helped split the trans lines. I added the aftermarket transfer case mount this time. 
Were the OD issues related to the plastic bearing separators coming out? I had that happen twice. fixed it by using metal caged bearings and shimming the slop out of the front bearing.
'68 Bee 383/TF/Factory Air...high school sweetheart
'67 GTX Clone project,500 six pack,Hemi4-speed,Dana
05 Dodge Viper, 505 V-10, 6-speed Tremec
| 
