CNC Ported Iron heads

Print Thread

Re: CNC Ported Iron heads [Re: Brian Hafliger] #1557011 01/03/14 06:23 AM 01/03/14 06:23 AM
Joined: Jul 2012 Posts: 429 Washington skrews mopar
skrews mopar Joined: Jul 2012 Posts: 429 Washington	Quote: Intake MCA is 2.200 at the pinch. Intake port poured right at 200cc. Thanks

Entire Thread
Subject	Posted By	Posted
CNC Ported Iron heads	Brian Hafliger	01/01/14 12:54 AM
Re: CNC Ported Iron heads	Brian Hafliger	01/01/14 12:55 AM
Re: CNC Ported Iron heads	Brian Hafliger	01/01/14 12:56 AM
Re: CNC Ported Iron heads	Brian Hafliger	01/01/14 01:10 AM
Re: CNC Ported Iron heads	408Dust	01/04/14 02:44 PM
Re: CNC Ported Iron heads	Brian Hafliger	01/05/14 04:12 AM
Re: CNC Ported Iron heads	408Dust	01/05/14 03:09 PM
Re: CNC Ported Iron heads	Crizila	01/01/14 01:34 AM
Re: CNC Ported Iron heads	Brian Hafliger	01/01/14 01:36 AM
Re: CNC Ported Iron heads	Crizila	01/01/14 01:46 AM
Re: CNC Ported Iron heads	Brian Hafliger	01/01/14 01:48 AM
Re: CNC Ported Iron heads	BPE	01/01/14 01:56 AM
Re: CNC Ported Iron heads	Dunnuck Racing	01/01/14 02:21 AM
Re: CNC Ported Iron heads	Brian Hafliger	01/01/14 05:04 AM
Re: CNC Ported Iron heads	FastOne	01/01/14 07:02 AM
Re: CNC Ported Iron heads	Brian Hafliger	01/01/14 07:13 AM
Re: CNC Ported Iron heads	pittsburghracer	01/01/14 07:24 AM
Re: CNC Ported Iron heads	skrews	01/01/14 09:29 AM
Re: CNC Ported Iron heads	sshemi	01/01/14 10:04 PM
Re: CNC Ported Iron heads	Brian Hafliger	01/01/14 10:26 PM
Re: CNC Ported Iron heads	RAMM	01/02/14 02:57 PM
Re: CNC Ported Iron heads	Brian Hafliger	01/02/14 09:36 PM
Re: CNC Ported Iron heads	Brian Hafliger	01/02/14 09:37 PM
Re: CNC Ported Iron heads	skrews	01/03/14 10:23 AM
Re: CNC Ported Iron heads	sshemi	01/03/14 04:26 PM
Re: CNC Ported Iron heads	Brian Hafliger	01/03/14 08:08 PM
Re: CNC Ported Iron heads	SLOW67	01/03/14 08:22 PM
Re: CNC Ported Iron heads	Brian Hafliger	01/03/14 08:26 PM
Re: CNC Ported Iron heads	pittsburghracer	01/03/14 05:22 PM
Re: CNC Ported Iron heads	RAMM	01/02/14 09:44 PM
Re: CNC Ported Iron heads	cudadoug	01/02/14 11:43 PM
Re: CNC Ported Iron heads	Brian Hafliger	01/03/14 12:43 AM
Re: CNC Ported Iron heads	cudadoug	01/03/14 02:17 AM
Re: CNC Ported Iron heads	Jwilli500	01/03/14 11:16 PM
Re: CNC Ported Iron heads	sshemi	01/03/14 11:57 PM
Re: CNC Ported Iron heads	jeff500	01/05/14 04:51 AM
Re: CNC Ported Iron heads	Brian Hafliger	01/05/14 05:06 AM
Re: CNC Ported Iron heads	BradH	01/03/14 08:37 PM
Re: CNC Ported Iron heads	Brian Hafliger	01/03/14 10:10 PM
Re: CNC Ported Iron heads	mopster	01/04/14 12:26 AM
Re: CNC Ported Iron heads	Brian Hafliger	01/04/14 01:04 AM
Re: CNC Ported Iron heads	mopster	01/04/14 01:24 AM
Re: CNC Ported Iron heads	Brian Hafliger	01/04/14 02:51 AM
Re: CNC Ported Iron heads	Brian Hafliger	01/04/14 05:35 AM
Re: CNC Ported Iron heads	mopster	01/04/14 12:17 PM
Re: CNC Ported Iron heads	BradH	01/05/14 06:22 PM
Re: CNC Ported Iron heads	ademon	01/05/14 06:46 PM
Re: CNC Ported Iron heads	Brian Hafliger	01/05/14 10:30 PM
Re: CNC Ported Iron heads	FastOne	01/04/14 01:06 AM
Re: CNC Ported Iron heads	Brian Hafliger	01/04/14 05:32 AM
Re: CNC Ported Iron heads	domingo	01/04/14 09:24 PM
Re: CNC Ported Iron heads	gch	01/04/14 11:10 PM
Re: CNC Ported Iron heads	FastOne	01/05/14 12:42 AM
Re: CNC Ported Iron heads	Brian Hafliger	01/05/14 04:19 AM
Re: CNC Ported Iron heads	BradH	01/05/14 06:08 PM
Re: CNC Ported Iron heads	Brian Hafliger	01/05/14 04:13 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To