Quote:

Quote:

Remember that an 86 Ramcharger has a single glass bulb on each side. Lighting both elements inside that bulb will likely overheat the bulb itself as well as the plastic adjusting clips and the wire harness....

Not a good idea.







, however regarding "brighter", lumens is lumens, percentage wise improvement is the question, and the main intended difference between low and high beams other then the wattage, is the beam spread, and in the hottest/brightest spot directly? ahead I suspect not a big improvement, but to the sides it would be a plus. maybe the best compromise to prevent filament/ glass envelope overheat issues would be a momentary button, can't believe the wiring wouldn't not handle that, unless they share a ground wire.

I like the idea

Last edited by jcc; 10/17/13 09:36 PM.
Reality check, that half the population is smarter then 50% of the people and it's a constantly contested fact.