Converting my 85 318 to hyd roller, did I forget anythi

Print Thread

Re: Converting my 85 318 to hyd roller, did I forget anythi [Re: scratchnfotraction] #1420360 04/16/13 11:55 PM 04/16/13 11:55 PM
Joined: Oct 2010 Posts: 162 Iowa T tt76400 OP member
tt76400 OP member T Joined: Oct 2010 Posts: 162 Iowa	It's a 85 block, which everyone says should be a roller cam block, with 360 heads, vin says 318 2v, but per the original owner, was a 318 4bbl Q-jet truck. Were all '85 318 blocks set up for roller cams even if they didn't have them?

Entire Thread
Subject	Posted By	Posted
Converting my 85 318 to hyd roller, did I forget anythi	tt76400	04/15/13 09:16 PM
Re: Converting my 85 318 to hyd roller, did I forget anythi	340SHORTY	04/16/13 12:15 AM
Re: Converting my 85 318 to hyd roller, did I forget anythi	tt76400	04/16/13 12:42 AM
Re: Converting my 85 318 to hyd roller, did I forget anythi	scratchnfotraction	04/16/13 01:30 PM
Re: Converting my 85 318 to hyd roller, did I forget anythi	scratchnfotraction	04/16/13 01:34 PM
Re: Converting my 85 318 to hyd roller, did I forget anythi	tt76400	04/17/13 03:55 AM
Re: Converting my 85 318 to hyd roller, did I forget anythi	scratchnfotraction	04/17/13 01:23 PM
Re: Converting my 85 318 to hyd roller, did I forget anythi	tt76400	04/17/13 10:24 PM
Re: Converting my 85 318 to hyd roller, did I forget anythi	scratchnfotraction	04/18/13 01:40 PM
Re: Converting my 85 318 to hyd roller, did I forget anythi	tt76400	04/18/13 10:11 PM

Hop To