Quote:
Quote:
Quote:
Quote:
A good starting point for a Dana 60 pinion depth is 3.125
8-3/4 /1.875 tapered pinion is 2.726 
and if you are replacing gears in an existing housing and the existing pattern looks good, you will want to start with the existing shim thickness.
 
 I have 742 carrier for my '68roadrunner and need to put 3.23s in it. Have any idea on the specs for it? 
742 carrier I start with an .090" shim and adjust from there.
"Follow me the wise man said, but he walked behind"
'92 D250 Club Cab CTD, 47RH conversion, pump tweaks, injectors, rear disc and hydroboost conversion.
'74 W200 Crew Cab 360, NV4500, D44, D60 and NP205 divorced transfer case. Rear disc and hydroboost conversion.
2019 1500 Long Horn Crew Cab 4WD, 5.7 Hemi.
| 
