Ring compressor recomendations

Print Thread

Re: Ring compressor recomendations [Re: Crizila] #1317088 10/08/12 12:17 PM 10/08/12 12:17 PM
Joined: Nov 2009 Posts: 252 Seattle, WA. E edp OP enthusiast
edp OP enthusiast E Joined: Nov 2009 Posts: 252 Seattle, WA.	thanks guys, thats quite a list! I figured the tapered one would be what I end up with. If stock pistons are 4.250 (I think - should measure) & mine are .030 over I assume I need the 4.280 tapered or do you want one slightly larger than the oversized piston? Oh yeah, going in a 69 383 HP motor, badger 10:1 pistons. Thx. E Last edited by edp; 10/08/12 12:19 PM.

Entire Thread
Subject	Posted By	Posted
Ring compressor recomendations	edp	10/08/12 06:22 AM
Re: Ring compressor recomendations	jamesc	10/08/12 06:26 AM
Re: Ring compressor recomendations	moparniac	10/08/12 10:05 AM
Re: Ring compressor recomendations	Crizila	10/08/12 11:25 AM
Re: Ring compressor recomendations	MPerry	10/08/12 11:33 AM
Re: Ring compressor recomendations	440Jim	10/08/12 02:56 PM
Re: Ring compressor recomendations	Crizila	10/08/12 03:21 PM
Re: Ring compressor recomendations	Triple Threat	10/08/12 03:58 PM
Re: Ring compressor recomendations	jamesc	10/08/12 04:56 PM
Re: Ring compressor recomendations	MR_P_BODY	10/08/12 03:57 PM
Re: Ring compressor recomendations	Crizila	10/08/12 04:00 PM
Re: Ring compressor recomendations	edp	10/08/12 04:17 PM
Re: Ring compressor recomendations	Triple Threat	10/08/12 04:20 PM

Hop To