Randy, it is confusing about the head bolt torque for the eddys. Eddy states 70 FT.LBS The ARP bolts that come with the heads state.

65 FT.LBS with Arp Moly or 85 FT.LBS with 30# oil.

And 60 FT.LBS with Arp Moly and Aluminum heads.

They dont suggest a Torque value with oil and Aluminum heads.

But heres what I know. When these heads first came out, alotof people and builders were using the 70# number and having some head gasket issues. The one shop stated they bumped it up to 75# and the issues stopped.

I myself wouldnt use anything less then 75 FT. LBS. Especially if your going to be useing the soft 8519pt gaskets. Anywhere between 75 and 80 FT.LBS should be good IMO for you. At 70 FT. LBS you will be risking a gasket failure.

Id guess your HP around 600+ or so. That cam isnt that big and niether is your comp. But she will be a runner.

With more cam 272@.050 and comp 12.5 and same heads, Dwayne estimated my HP around 620 on his dyno. Im thinking thats abit low, Im hoping for 650.