Quote: If it were mine; i think I would find a cheap used stock Mopar iron 4 barrel intake, or if not then a performer intake, and swap it along with a thermoquad carb, and dual exhausts. Relatively easy changes to make without trying to get too much out of a smog engine. Those should make a nice difference. Then maybe eventually 3.23 gears to liven it up even more
Btw, beautiful car!
I'm assuming the supply of used american car parts in Israel is sketchy at best but a stock iron intake with a Thermoquad and a set of 2.5" duals with an H-pipe and good mufflers will wake it right up.
Another cheap but somewhat time consuming mod would be to get a roller 9 way key timing chain set, a degree wheel kit and advance the cam that is in it 4 degrees. That will increase bottom end torque and with the actual compression ratio being in the 7's:1 range, (the manual lied lol) you can use all the help you can get.
