Indy's CNC ported 360-1 heads

Print Thread

Re: Indy's CNC ported 360-1 heads [Re: SB449VALIANT] #125966 09/25/08 02:11 PM 09/25/08 02:11 PM
Joined: Jan 2003 Posts: 8,547 State College, PA RyanJ moparts member
RyanJ moparts member Joined: Jan 2003 Posts: 8,547 State College, PA	Guess they're not bigger than 245 stock.... the RP245 I just measured with 2.15 Ferrea Comp Plus valve 245.5 CC... The std port height "245" head must be smaller than 245. I've only had 2 sets of those here & never measured them volume wise. 369's Modified set are 254 CC.

Entire Thread
Subject	Posted By	Posted
Indy's CNC ported 360-1 heads	a408swinger	09/25/08 01:07 PM
Re: Indy's CNC ported 360-1 heads	B G Racing	09/25/08 01:19 PM
Re: Indy's CNC ported 360-1 heads	a408swinger	09/25/08 01:26 PM
Re: Indy's CNC ported 360-1 heads	S/ST 3040	09/25/08 01:40 PM
Re: Indy's CNC ported 360-1 heads	SB449VALIANT	09/25/08 03:19 PM
Re: Indy's CNC ported 360-1 heads	SB449VALIANT	09/25/08 03:25 PM
Re: Indy's CNC ported 360-1 heads	RyanJ	09/25/08 04:34 PM
Re: Indy's CNC ported 360-1 heads	DavidDean	09/25/08 05:41 PM
Re: Indy's CNC ported 360-1 heads	RyanJ	09/25/08 05:54 PM
Re: Indy's CNC ported 360-1 heads	SB449VALIANT	09/25/08 06:01 PM
Re: Indy's CNC ported 360-1 heads	RyanJ	09/25/08 06:11 PM
Re: Indy's CNC ported 360-1 heads	a408swinger	09/25/08 07:35 PM
Re: Indy's CNC ported 360-1 heads	RyanJ	09/25/08 08:23 PM
Re: Indy's CNC ported 360-1 heads	a408swinger	09/25/08 08:48 PM
Re: Indy's CNC ported 360-1 heads	B G Racing	09/25/08 09:07 PM
Re: Indy's CNC ported 360-1 heads	RyanJ	09/26/08 05:51 PM
Re: Indy's CNC ported 360-1 heads	Brian Hafliger	09/26/08 05:57 PM
Re: Indy's CNC ported 360-1 heads	lenweiler	09/26/08 09:05 PM
Re: Indy's CNC ported 360-1 heads	a408swinger	09/26/08 09:00 PM
Re: Indy's CNC ported 360-1 heads	SB449VALIANT	09/26/08 09:41 PM
Re: Indy's CNC ported 360-1 heads	a408swinger	09/27/08 02:41 AM
Re: Indy's CNC ported 360-1 heads	S/ST 3040	08/15/09 03:02 AM
Re: Indy's CNC ported 360-1 heads	SB449VALIANT	08/15/09 03:46 AM
Re: Indy's CNC ported 360-1 heads	S/ST 3040	08/15/09 01:02 PM
Re: Indy's CNC ported 360-1 heads	RyanJ	08/15/09 01:27 PM
Re: Indy's CNC ported 360-1 heads	S/ST 3040	08/15/09 02:12 PM
Re: Indy's CNC ported 360-1 heads	SB449VALIANT	08/15/09 03:19 PM
Re: Indy's CNC ported 360-1 heads	S/ST 3040	08/15/09 03:30 PM
Re: Indy's CNC ported 360-1 heads	Ian	08/15/09 01:28 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To