Indy's CNC ported 360-1 heads

Print Thread

Re: Indy's CNC ported 360-1 heads [Re: a408swinger] #125959 09/25/08 09:40 AM 09/25/08 09:40 AM
Joined: Jul 2006 Posts: 4,595 On the south side of Nowhere S S/ST 3040 master
S/ST 3040 master S Joined: Jul 2006 Posts: 4,595 On the south side of Nowhere	I've never checked out a 360-1 head of any version but, the CNC 230cc 360-2 heads need a little hand work and valve job. IIRC, flow was a little unstable at most of the usable lift points. 4709112-DSCN1596.JPG (204 downloads)

Entire Thread
Subject	Posted By	Posted
Indy's CNC ported 360-1 heads	a408swinger	09/25/08 01:07 PM
Re: Indy's CNC ported 360-1 heads	B G Racing	09/25/08 01:19 PM
Re: Indy's CNC ported 360-1 heads	a408swinger	09/25/08 01:26 PM
Re: Indy's CNC ported 360-1 heads	S/ST 3040	09/25/08 01:40 PM
Re: Indy's CNC ported 360-1 heads	SB449VALIANT	09/25/08 03:19 PM
Re: Indy's CNC ported 360-1 heads	SB449VALIANT	09/25/08 03:25 PM
Re: Indy's CNC ported 360-1 heads	RyanJ	09/25/08 04:34 PM
Re: Indy's CNC ported 360-1 heads	DavidDean	09/25/08 05:41 PM
Re: Indy's CNC ported 360-1 heads	RyanJ	09/25/08 05:54 PM
Re: Indy's CNC ported 360-1 heads	SB449VALIANT	09/25/08 06:01 PM
Re: Indy's CNC ported 360-1 heads	RyanJ	09/25/08 06:11 PM
Re: Indy's CNC ported 360-1 heads	a408swinger	09/25/08 07:35 PM
Re: Indy's CNC ported 360-1 heads	RyanJ	09/25/08 08:23 PM
Re: Indy's CNC ported 360-1 heads	a408swinger	09/25/08 08:48 PM
Re: Indy's CNC ported 360-1 heads	B G Racing	09/25/08 09:07 PM
Re: Indy's CNC ported 360-1 heads	RyanJ	09/26/08 05:51 PM
Re: Indy's CNC ported 360-1 heads	Brian Hafliger	09/26/08 05:57 PM
Re: Indy's CNC ported 360-1 heads	lenweiler	09/26/08 09:05 PM
Re: Indy's CNC ported 360-1 heads	a408swinger	09/26/08 09:00 PM
Re: Indy's CNC ported 360-1 heads	SB449VALIANT	09/26/08 09:41 PM
Re: Indy's CNC ported 360-1 heads	a408swinger	09/27/08 02:41 AM
Re: Indy's CNC ported 360-1 heads	S/ST 3040	08/15/09 03:02 AM
Re: Indy's CNC ported 360-1 heads	SB449VALIANT	08/15/09 03:46 AM
Re: Indy's CNC ported 360-1 heads	S/ST 3040	08/15/09 01:02 PM
Re: Indy's CNC ported 360-1 heads	RyanJ	08/15/09 01:27 PM
Re: Indy's CNC ported 360-1 heads	S/ST 3040	08/15/09 02:12 PM
Re: Indy's CNC ported 360-1 heads	SB449VALIANT	08/15/09 03:19 PM
Re: Indy's CNC ported 360-1 heads	S/ST 3040	08/15/09 03:30 PM
Re: Indy's CNC ported 360-1 heads	Ian	08/15/09 01:28 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To