Indy's CNC ported 360-1 heads

Print Thread

Re: Indy's CNC ported 360-1 heads [Re: a408swinger] #125957 09/25/08 09:19 AM 09/25/08 09:19 AM
Joined: Mar 2006 Posts: 9,910 Eighty Four, PA B G Racing master
B G Racing master Joined: Mar 2006 Posts: 9,910 Eighty Four, PA	What cubic"? We have had great luck with the 360-1 CNC-245 with flow over 330 cfm @700 with a lot of compression.Other than touching up the valve job and correcting all the spring height They are pretty good the way the come. [IMG]http://i430.photobucket.com/albums/qq21/ajcasini/max_zpsdppwd9km.jpg[/IMG]

Entire Thread
Subject	Posted By	Posted
Indy's CNC ported 360-1 heads	a408swinger	09/25/08 01:07 PM
Re: Indy's CNC ported 360-1 heads	B G Racing	09/25/08 01:19 PM
Re: Indy's CNC ported 360-1 heads	a408swinger	09/25/08 01:26 PM
Re: Indy's CNC ported 360-1 heads	S/ST 3040	09/25/08 01:40 PM
Re: Indy's CNC ported 360-1 heads	SB449VALIANT	09/25/08 03:19 PM
Re: Indy's CNC ported 360-1 heads	SB449VALIANT	09/25/08 03:25 PM
Re: Indy's CNC ported 360-1 heads	RyanJ	09/25/08 04:34 PM
Re: Indy's CNC ported 360-1 heads	DavidDean	09/25/08 05:41 PM
Re: Indy's CNC ported 360-1 heads	RyanJ	09/25/08 05:54 PM
Re: Indy's CNC ported 360-1 heads	SB449VALIANT	09/25/08 06:01 PM
Re: Indy's CNC ported 360-1 heads	RyanJ	09/25/08 06:11 PM
Re: Indy's CNC ported 360-1 heads	a408swinger	09/25/08 07:35 PM
Re: Indy's CNC ported 360-1 heads	RyanJ	09/25/08 08:23 PM
Re: Indy's CNC ported 360-1 heads	a408swinger	09/25/08 08:48 PM
Re: Indy's CNC ported 360-1 heads	B G Racing	09/25/08 09:07 PM
Re: Indy's CNC ported 360-1 heads	RyanJ	09/26/08 05:51 PM
Re: Indy's CNC ported 360-1 heads	Brian Hafliger	09/26/08 05:57 PM
Re: Indy's CNC ported 360-1 heads	lenweiler	09/26/08 09:05 PM
Re: Indy's CNC ported 360-1 heads	a408swinger	09/26/08 09:00 PM
Re: Indy's CNC ported 360-1 heads	SB449VALIANT	09/26/08 09:41 PM
Re: Indy's CNC ported 360-1 heads	a408swinger	09/27/08 02:41 AM
Re: Indy's CNC ported 360-1 heads	S/ST 3040	08/15/09 03:02 AM
Re: Indy's CNC ported 360-1 heads	SB449VALIANT	08/15/09 03:46 AM
Re: Indy's CNC ported 360-1 heads	S/ST 3040	08/15/09 01:02 PM
Re: Indy's CNC ported 360-1 heads	RyanJ	08/15/09 01:27 PM
Re: Indy's CNC ported 360-1 heads	S/ST 3040	08/15/09 02:12 PM
Re: Indy's CNC ported 360-1 heads	SB449VALIANT	08/15/09 03:19 PM
Re: Indy's CNC ported 360-1 heads	S/ST 3040	08/15/09 03:30 PM
Re: Indy's CNC ported 360-1 heads	Ian	08/15/09 01:28 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To