8 3/4 stock axles question - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech 8 3/4 stock axles question

Print Thread

Re: 8 3/4 stock axles question [Re: CompWedgeEngines] #1206234 04/01/12 12:28 AM 04/01/12 12:28 AM
Joined: Jan 2003 Posts: 8,016 Polson, MT DoctorDiff master
DoctorDiff master Joined: Jan 2003 Posts: 8,016 Polson, MT	The only long, press-in stud with the correct knurl size is a Mr Gasket product (MRG-4311). You must enlarge the holes with a 43/64" bit to install Moroso studs. BTW, I did not receive an E-mail from you. Contact info

Entire Thread
Subject	Posted By	Posted
8 3/4 stock axles question	CompWedgeEngines	03/30/12 01:47 AM
Re: 8 3/4 stock axles question	Sport440	03/30/12 02:22 AM
Re: 8 3/4 stock axles question	MR_P_BODY	03/30/12 02:23 AM
Re: 8 3/4 stock axles question	Cab_Burge	03/30/12 02:43 AM
Re: 8 3/4 stock axles question	Sport440	03/31/12 04:52 AM
Re: 8 3/4 stock axles question	DoctorDiff	04/01/12 04:28 AM
Re: 8 3/4 stock axles question	CompWedgeEngines	04/01/12 06:51 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1