Priming oil pump before engine start.

Print Thread

Re: Priming oil pump before engine start. [Re: 67SATisfaction] #1179457 02/16/12 05:48 PM 02/16/12 05:48 PM
Joined: Jan 2003 Posts: 1,633 Jacksonville, NC RonP top fuel
RonP top fuel Joined: Jan 2003 Posts: 1,633 Jacksonville, NC	on the steel ones I use a long flat tip screw driver and twist it and the gear will ride up off the cam and then I use a long magnet tool i have to grab it and pull it up out.

Entire Thread
Subject	Posted By	Posted
Priming oil pump before engine start.	67SATisfaction	02/16/12 09:01 PM
Re: Priming oil pump before engine start.	RonP	02/16/12 09:05 PM
Re: Priming oil pump before engine start.	RoadRunner	02/16/12 09:18 PM
Re: Priming oil pump before engine start.	John_Kunkel	02/16/12 09:18 PM
Re: Priming oil pump before engine start.	67SATisfaction	02/16/12 09:32 PM
Re: Priming oil pump before engine start.	RonP	02/16/12 09:48 PM
Re: Priming oil pump before engine start.	RoadRunner	02/16/12 10:36 PM
Re: Priming oil pump before engine start.	67SATisfaction	02/16/12 11:10 PM
Re: Priming oil pump before engine start.	JohnRR	02/16/12 11:48 PM
Re: Priming oil pump before engine start.	CR8CRSHR	02/17/12 12:06 AM
Re: Priming oil pump before engine start.	MLR426	02/17/12 05:34 PM
Re: Priming oil pump before engine start.	HEMIFRED	02/17/12 08:01 PM
Re: Priming oil pump before engine start.	NANKET	02/17/12 08:07 PM
Re: Priming oil pump before engine start.	67SATisfaction	02/17/12 11:34 PM

Hop To