Priming oil pump before engine start.

Print Thread

Re: Priming oil pump before engine start. [Re: 67SATisfaction] #1179453 02/16/12 05:05 PM 02/16/12 05:05 PM
Joined: Jan 2003 Posts: 1,633 Jacksonville, NC RonP top fuel
RonP top fuel Joined: Jan 2003 Posts: 1,633 Jacksonville, NC	You need to pull that gear/shaft up out and use a priming tool that will go down through that hole into the oil pump. Drill is run counter clockwise.

Entire Thread
Subject	Posted By	Posted
Priming oil pump before engine start.	67SATisfaction	02/16/12 09:01 PM
Re: Priming oil pump before engine start.	RonP	02/16/12 09:05 PM
Re: Priming oil pump before engine start.	RoadRunner	02/16/12 09:18 PM
Re: Priming oil pump before engine start.	John_Kunkel	02/16/12 09:18 PM
Re: Priming oil pump before engine start.	67SATisfaction	02/16/12 09:32 PM
Re: Priming oil pump before engine start.	RonP	02/16/12 09:48 PM
Re: Priming oil pump before engine start.	RoadRunner	02/16/12 10:36 PM
Re: Priming oil pump before engine start.	67SATisfaction	02/16/12 11:10 PM
Re: Priming oil pump before engine start.	JohnRR	02/16/12 11:48 PM
Re: Priming oil pump before engine start.	CR8CRSHR	02/17/12 12:06 AM
Re: Priming oil pump before engine start.	MLR426	02/17/12 05:34 PM
Re: Priming oil pump before engine start.	HEMIFRED	02/17/12 08:01 PM
Re: Priming oil pump before engine start.	NANKET	02/17/12 08:07 PM
Re: Priming oil pump before engine start.	67SATisfaction	02/17/12 11:34 PM

Hop To