Priming oil pump before engine start.

Print Thread

Re: Priming oil pump before engine start. [Re: 67SATisfaction] #1179455 02/16/12 05:18 PM 02/16/12 05:18 PM
Joined: Jan 2003 Posts: 25,949 Rio Linda, CA John_Kunkel Too Many Posts
John_Kunkel Too Many Posts Joined: Jan 2003 Posts: 25,949 Rio Linda, CA	While you're turning the pump you need to slowly turn the crankshaft at least two full revolutions to get oil to the top end. The INTERNET, the MISinformation superhighway

Entire Thread
Subject	Posted By	Posted
Priming oil pump before engine start.	67SATisfaction	02/16/12 09:01 PM
Re: Priming oil pump before engine start.	RonP	02/16/12 09:05 PM
Re: Priming oil pump before engine start.	RoadRunner	02/16/12 09:18 PM
Re: Priming oil pump before engine start.	John_Kunkel	02/16/12 09:18 PM
Re: Priming oil pump before engine start.	67SATisfaction	02/16/12 09:32 PM
Re: Priming oil pump before engine start.	RonP	02/16/12 09:48 PM
Re: Priming oil pump before engine start.	RoadRunner	02/16/12 10:36 PM
Re: Priming oil pump before engine start.	67SATisfaction	02/16/12 11:10 PM
Re: Priming oil pump before engine start.	JohnRR	02/16/12 11:48 PM
Re: Priming oil pump before engine start.	CR8CRSHR	02/17/12 12:06 AM
Re: Priming oil pump before engine start.	MLR426	02/17/12 05:34 PM
Re: Priming oil pump before engine start.	HEMIFRED	02/17/12 08:01 PM
Re: Priming oil pump before engine start.	NANKET	02/17/12 08:07 PM
Re: Priming oil pump before engine start.	67SATisfaction	02/17/12 11:34 PM

Hop To