Bellhousing interchange - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Bellhousing interchange

Print Thread

Re: Bellhousing interchange [Re: JohnRR] #1170582 02/02/12 04:29 PM 02/02/12 04:29 PM
Joined: Mar 2008 Posts: 766 Ohio Dan Brewer super stock
Dan Brewer super stock Joined: Mar 2008 Posts: 766 Ohio	Yep. Will work no problem. Ballstud will screw in lower of the 2 holes. You might have to change fork pivot depending on what it origanlly came out of. Dan A833 4-speeds, parts & services http://www.brewersperformance.com/

Entire Thread
Subject	Posted By	Posted
Bellhousing interchange	GTX MATT	02/02/12 06:02 PM
Re: Bellhousing interchange	JohnRR	02/02/12 06:21 PM
Re: Bellhousing interchange	Dan Brewer	02/02/12 08:29 PM
Re: Bellhousing interchange	GTX MATT	02/04/12 07:38 AM
Re: Bellhousing interchange	JohnRR	02/04/12 03:06 PM
Re: Bellhousing interchange	GTX MATT	02/05/12 07:32 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1