new headlight bezels are fair price from rockauto and tail lights
member thedodgeboys has stuff for them also,I got the full rubber set for mine
![](/ubbthreads/images/graemlins/thumbs.gif)
Allen had one roll pan left and he has some of those euro tail lights for them too.
the plastic piece for the trim are $$$$$$ when removed there are no holes per say but it will have a lot of the rivit/studs to be removed...in the lower corner of the cab,the trim piece does have a small hole were it bolts a clip to hold the trim on.
i shaved it all off of mine.
if the 8 3/8 10 bolt axle aka 8 1/4 does swap axles i have a set thats 5 on 4.5 if you want( is a complete rear axle 3.2? gear )
FYI.gear ratio will be stamped in the ring gear along with yr
i will look around for part #s for the rotors,i have the ticket somewhere when i got mine from autozone...50$ each
the gear indicater has a small box gizmo on the back of the gauge cluster that has a cable hook that hooks on a sloted arm on the colum.
its the first thing to go most times and if someone droped the colum loose and did not un-hook it it stretches it out of wack.
i will look at a few of the cluster I have and see if there is a good one if you need it
if you pull the heater control..very gently as the switch likes to break off of the rack.
I swaped all mine to 85 wire harness/colum and got rid of the turn sig dimmer and wiper stuff myself,it has problems when its beat to death...yours not so much probly.
![](/ubbthreads/images/graemlins/popcrn.gif)