Thanks everyone for their help on my alternator conversion. Very cost effective. From the U-Pull yard in Denver I got a Denso 146amp alternator out of a Durango $25, Mopar/Wells electronic regulator and harness $5, and the proper dual v belt pulley $0. I had to go to Advanced auto and get a Mr Gasket alternator bracket for like $12 with my discount and a couple longer belts. I have allot of wire from old projects and audio installs so I re-purposed that as well as a 150 amp fuse and holder in the 4 gauge wire from the alternator output to the battery. Real simple install and just had to narrow the alternator bracket just a little to have the alternator fit like it was meant to be there. I did bypass the amp gauge and used a Sunpro voltmeter to monitor the electrical. I modified the gauge to make it blend in with the dash in the truck.
Great upgrade for the modifications I have planned like a Viper cooling fan, EFI, and an audio system. Here are a few pics...





Thanks again for everyone's insight on my little project!