Quote:

The problem is getting to the backside. And more importantly, getting all the crud out thst caused it to rust from the inside out. I'd suggest cutting out a square to get to the inside, try to vacuum out all the crap, then patch the hole with good metal.

My quarters had a good 4-5" deep pile of dirt, rust flakes, etc between the outer skin and the inner panel. I couldn't access it till I cut the quarter off.

Plus, the inner panel will be just as soft and rusty and needs fixed too. It's easiest to remove the whole quarter to find all the hidden rust, fix it, and patch the quarter and re-use, or get a new quarter.



If you had looked at the pictures you would have seen that there is no back side.

First off - you are crazy - it's a good crazy, but still crazy. I think I would have started with a better car.

My suggestion would be to cut out the section and weld in a patch. It looks like to big an area for welding the holes.