Quote:

---

Quote:

---

I'm betting on rust in the cylinders first and then a stuck valve in a guide Please let us know what you find

---

Ding! Ding! Ding! Winner, winner, chicken dinner!!!

Well, here's what I found.

7 of the bores look like this.


Give or take carbon, but they all look nice. That is except for #8 which looks like this.

#6 is okay but you can see where some moisture was in the head affecting that plug, and #8's valves were rusted up nicely...


All the lifters looked pretty with the exception of a couple that looked like they may not be rotating in the bore real good. smooth but black stains. the two on the back end were gummy as you can see and the cam looked gummy too. The lifters came out with a little coaxing gooey orange in the top from rust but still functioned. The cam looked pretty except for the back end which looked like this.


You think thats why it didn't turn over? Mabe you should of figured that out before you ask people for oppinions on why it won't turn over. Looks like a junk scrap yard motor to me. THE BIG GUY