Quote:

moly is always the best for suspension parts in my opinion due to the stresses involved. but what about other uses, such as push-pull motions in brake pedal rods, throttle linkage, battery cutoff switches, etc. also, is the general consensus more to a "lined" race[nylon/kevlar material] than non-lined[metal-to-metal] race?




The smaller stuff you dont need the big dollar stuff
like throttle... I dont even use a heim on the brake
pedal... tie rods you want good ones... if its a
chassis point(ladder bars/4-links I use the moly
no liner...I dont want that getting beat out and
having a loose/worn out heim... I clean and lube
them but you can try the dust covers