Quote:

Quote:



My favorite cam I've used have been sourced from hughes. Racer brown and other mopar specific cams are likely just as good, though I've yet to try them. But Dave from Hughes has always been very helpful everytime I've called; And when comparing cam of similar size to his cams, I'm a believer. I used a similar grind cam from him compared to a MP cam I had and the power difference was more than just seat-of-the-pants difference.

If you were to check out his stuff, his HEH3237 would be a good cam for such a car (232/237 @ .050, .540/.548 lift, 110 LSA). Healthy idle to sound good at the cruise in, enough vacuum for a street car, enough power all around to satisfy.





I have sent a mail to hughes but they are taking two weeks or more for replying.
Also have filled the Lunati page "Find my cam" form with the engine specs and my intentions, and they have replied to me very quick.
They say that acordding to their calculations this should be the cam:

http://www.summitracing.com/parts/LUN-60302/

Also have found a thread where a member seems to be very happy with the 60304,but i don,t know what compression ratio he is running.


https://board.moparts.org/ubbthreads/showflat.php?Cat=0&Number=5899959&Main=5899532