Quote:

---

Quote:

---

hypothetical example...two core motors 1) 383 and 2) a 440 both have steel crank.

to do a budget rebuild (reuse block, crank, rods, heads)...assume new rings, brearings, came, intake.....I imagine the cost would be the same/similar as labor is a constant

to do a hi-po rebuild, new crank, rods, pistons, etc...again, i imagine the cost would have to be the same or similar.


that being said, why wouldnt you want to start with bigger motor to begin with?

---

You're wasting your breath spouting logic to the illogical.


Dave

---

Sometimes, GREAT and INNOVATIVE concepts come from
the ILLOGICAL!! Being cheap HAS it's limitations.