|
Re: SRD Assassin Traction Device. is anybody useing them??
[Re: mopar65]
#1007773
06/06/11 12:13 PM
06/06/11 12:13 PM
|
Joined: Feb 2005
Posts: 5,221 Branson, Mo.
joedust451
super gas
|
super gas
Joined: Feb 2005
Posts: 5,221
Branson, Mo.
|
Quote:
I was checking site out over the weekend and found this site.
http://srdparts.com/index.php?option=com...50&Itemid=1
i emailed them and they said they would work fine with my mopar superstock springs and i know caltracs says not to use theres with super stock springs.so before i go and spend the money i thought i would see if anybody is running a set before i spend the money on them. but they look like a nice set up thanks Mopar65
Hey bobby, I thought you had Caltracs, Those look like there plenty adjustable, but will they work with "multi" leaf springs, if not, then you might as well get the Caltracs & mono leaf kit, you'll still need an adj. shock, those also look like there more of a traction bar type set up, The caltracs have that rap-around type set-up that puts pressure on the top of the spring close too the eye, this keeps the spring from buckling at that point, thats the weak area, with those your showing it would need a strong (thick) front section buy the eye so it won't flex up, of coarse if you look at the caltrac monos there very thick up front, over a 1/2", maybe close to 3/4", so there not going to flex much & wrap up, it applies all the force on the rear so it plants itself.
|
|
|
|
|
|