All Posts Made By Uberpube

Threads Created \| All Posts All Posts Made By Uberpube
Title	Forum	Post Time
Re: Low deck Indy 540 on the dyno	Unlawfl's Race & Engine Tech	05/04/24 04:18 AM
Re: Replacing rhe bronze gear on distributor shaft?	Unlawfl's Race & Engine Tech	05/02/24 01:29 PM
Re: Todd Goodwin’s Latest	Unlawfl's Race & Engine Tech	04/30/24 11:06 PM
Re: Todd Goodwin’s Latest	Unlawfl's Race & Engine Tech	04/30/24 01:31 AM
Re: Todd Goodwin’s Latest	Unlawfl's Race & Engine Tech	04/29/24 12:14 AM
Re: Trick Flow 270 Heads	Unlawfl's Race & Engine Tech	04/28/24 10:17 PM
Re: Making a pile of mismatched parts 'work' in a street car	Unlawfl's Race & Engine Tech	04/22/24 04:01 AM
Re: The elusive D/W series 26x21 440 ac rad	Sandy's Truck Shop	04/20/24 09:41 PM
Re: The elusive D/W series 26x21 440 ac rad	Sandy's Truck Shop	04/20/24 02:20 AM
The elusive D/W series 26x21 440 ac rad	Sandy's Truck Shop	04/19/24 02:46 AM
Re: Beware of the knock offs	Unlawfl's Race & Engine Tech	04/18/24 02:55 AM
Re: Beware of the knock offs	Unlawfl's Race & Engine Tech	04/16/24 10:31 PM
Re: Hard water	Stu Harmon General Forum	04/16/24 10:24 PM
Re: Air Pressure Gauge	Unlawfl's Race & Engine Tech	04/16/24 10:17 PM
Re: Truck stroker-part deux - 528	Unlawfl's Race & Engine Tech	04/16/24 02:06 AM
Re: Beware of the knock offs	Unlawfl's Race & Engine Tech	04/13/24 04:16 PM
Truck stroker-part deux - 528	Unlawfl's Race & Engine Tech	04/13/24 03:49 PM
Re: Oil pressure gauge line leaked --> need new carpet	Unlawfl's Race & Engine Tech	04/05/24 12:26 AM
Thinner motor mount biscuits	Moparts Question and Answer	04/01/24 03:15 PM
Re: R12 vs R 134 expansion valve	Moparts Question and Answer	04/01/24 03:11 PM

Page 1 of 32

…